.---------------------------------------------------. |Atari ST/STe/MSTe/TT/F030 Hardware Register Listing| `---------------------------------------------------' Address Description Space -------+----------------------------------------------------------------+----- ########CPU Reset Vectors ###### -------+----------------------------------------------------------------+----- $000000|Reset : Initial SSP |SP $000004|Reset : Initial PC |SP -------+----------------------------------------------------------------+----- ########CPU Exception Vectors ###### -------+----------------------------------------------------------------+----- $000008|Bus Error |SD $00000C|Address Error |SD $000010|Illegal Instruction |SD $000014|Zero Divide |SD $000018|CHK, CHK2 Instruction |SD $00001C|cpTRAPcc, TRAPcc, TRAPV |SD $000020|Privilege Violation |SD $000024|Trace |SD $000028|Line 1010 Emulator (LineA) |SD $00002C|Line 1111 Emulator (LineF) |SD $000030|(Unassigned, Reserved) |SD $000034|Coprocessor Protocol Violation (68030) |SD $000038|Format Error (68010) |SD $00003C|Uninitialized Interrupt Vector |SD $000040|(Unassigned, Reserved) |SD : | : : | : $00005F|(Unassigned, Reserved) |SD $000060|Spurious Interrupt (Bus error during interrupt) |SD -------+----------------------------------------------------------------+----- ########Auto-Vector Interrupts ###### -------+----------------------------------------------------------------+----- $000064|Level 1 Int Autovector (TT VME) |SD $000068|Level 2 Int Autovector (HBL) |SD $00006C|Level 3 Int Autovector (TT VME) |SD $000070|Level 4 Int Autovector (VBL) |SD $000074|Level 5 Int Autovector |SD $000078|Level 6 Int Autovector (MFP) |SD $00007C|Level 7 Int Autovector |SD -------+----------------------------------------------------------------+----- ########Trap Instruction Vectors (Trap #n = Vector number + 32 + n) ###### -------+----------------------------------------------------------------+----- $000080|Trap #0 |SD $000084|Trap #1 (GemDOS) |SD $000088|Trap #2 (AES/VDI) |SD $00008C|Trap #3 |SD $000090|Trap #4 |SD $000094|Trap #5 |SD $000098|Trap #6 |SD $00009C|Trap #7 |SD $0000A0|Trap #8 |SD $0000A4|Trap #9 |SD $0000A8|Trap #10 |SD $0000AC|Trap #11 |SD $0000B0|Trap #12 | $0000B4|Trap #13 (BIOS) |SD $0000B8|Trap #14 (XBIOS) |SD -------+----------------------------------------------------------------+----- ########Math Coprocessor Vectors (68881/68882/Internal) ###### -------+----------------------------------------------------------------+----- $0000C0|FFCP Branch or Set on Unordered Condition |SD $0000C4|FFCP Inexact Result |SD $0000C8|FFCP Divide by Zero |SD $0000CC|FFCP Underflow |SD $0000D0|FFCP Operand Error |SD $0000D4|FFCP Overflow |SD $0000D8|FFCP Signaling NAN |SD $0000DC|(Unassigned, Reserved) |SD -------+----------------------------------------------------------------+----- ########PMMU Coprocessor Vectors (68851/Internal) ###### -------+----------------------------------------------------------------+----- $0000E0|MMU Configuration Error |SD $0000E4|MC68851, not used by MC68030 |SD $0000E8|MC68851, not used by MC68030 |SD -------+----------------------------------------------------------------+----- ########Miscellaneous Vectors ###### -------+----------------------------------------------------------------+----- $0000EC|(Unassigned, Reserved) |SD : | : : | : $0000FF|(Unassigned, Reserved) |SD -------+----------------------------------------------------------------+----- ########User Assigned Interrupt Vectors ###### -------+----------------------------------------------------------------+----- $000100|ST-MFP-0 - Centronics busy |SD $000104|ST-MFP-1 - RS-232 DCD |SD $000108|ST-MFP-2 - RS-232 CTS |SD $00010C|ST-MFP-3 - Blitter done |SD $000110|ST-MFP-4 - Timer D (USART timer) |SD $000114|ST-MFP-5 - Timer C (200hz Clock) |SD $000118|ST-MFP-6 - Keyboard/MIDI (ACIA) |SD $00011C|ST-MFP-7 - FDC/HDC |SD $000120|ST-MFP-8 - Timer B (HBL) |SD $000124|ST-MFP-9 - Send Error |SD $000128|ST-MFP-10 - Send buffer empty |SD $00012C|ST-MFP-11 - Receive error |SD $000130|ST-MFP-12 - Receive buffer full |SD $000134|ST-MFP-13 - Timer A (STe sound) |SD $000138|ST-MFP-14 - RS-232 Ring detect |SD $00013C|ST-MFP-15 - GPI7 - Monochrome Detect |SD $000140|TT-MFP-0 - GPI 0 |SD $000144|TT-MFP-1 - GPI 1 |SD $000148|TT-MFP-2 - SCC-DMA Controller |SD $00014C|TT-MFP-3 - Ring Indicator SCC B |SD $000150|TT-MFP-4 - Timer D |SD $000154|TT-MFP-5 - Timer C |SD $000158|TT-MFP-6 - (Reserved) GPI 4 |SD $00015C|TT-MFP-7 - SCSI DMA Controller |SD $000160|TT-MFP-8 - Timer B |SD $000164|TT-MFP-9 - Send Error |SD $000168|TT-MFP-10 - Send buffer empty |SD $00016C|TT-MFP-11 - Receive error |SD $000170|TT-MFP-12 - Receive buffer full |SD $000174|TT-MFP-13 - Timer A |SD $000176|TT-MFP-14 - TT Clock (MC146818A) |SD $00017C|TT-MFP-15 - TT-SCSI Drive Controller NCR 5380 |SD $000180|SCC Interrupt |SD $0001BC|SCC Interrupt |SD $0001C0|User Defined, Unused |SD : | : : : | : $0003FC|User Defined, Unused |SD -------+----------------------------------------------------------------+----- Address Size Description Name -------+-----+-----------------------------------------------------+---------- ##############System Crash Page ########### -------+-----+-----------------------------------------------------+---------- $000380|long |Validates System Crash Page if $12345678 |proc_lives $000384|.....|Saved registers D0-D7 |proc_dregs $0003A4|.....|Saved registers A0-A7 |proc_aregs $0003C4|long |Vector number of crash exception |proc_enum $0003C8|long |Saved USP |proc_usp $0003CC|.....|Saved 16 words from exception stack |proc_stk -------+-----+-----------------------------------------------------+---------- ##############System Variables ########### -------+-----+-----------------------------------------------------+---------- $000400|long |GEM Event timer vector |etv_timer $000404|long |GEM Critical error handler |etv_critic $000408|long |GEM Program termination vector |etv_term $00040C|long |GEM Additional vector #1 (Unused) |etv_xtra : | : | : : : : : | : $00041C|long |GEM Additional vector #5 (Unused) |etv_xtra $000420|long |Validates memory configuration if $752019F3 |memvalid $000424|word |Copy of contents of $FF8001 |memctrl $000426|long |Validates resvector if $31415926 |resvalid $00042A|long |Reset vector |resvector $00042E|long |Physical top of RAM |phystop $000432|long |Start of TPA (user memory) |_membot $000436|long |End of TPA (user memory) |_memtop $00043A|long |Validates memcntrl and memconf if $237698AA |memval2 $00043E|word |If nonzero, floppy disk VBL routine is disabled |flock $000440|word |Floppy Seek rate - 0:6ms, 1:12ms, 2:2ms, 3:3ms |seekrate $000442|word |Time between two timer calls (in milliseconds) |_timer_ms $000444|word |If not zero, verify floppy disk writes |_fverify $000446|word |Default boot device |_bootdev $000448|word |0 - NTSC (60hz), <>0 - PAL (50hz) |palmode $00044A|word |Default video resolution |defshiftmod $00044C|word |Copy of contents of $FF8260 |sshiftmod $00044E|long |Pointer to video RAM (logical screen base) |_v_bas_ad $000452|word |If not zero, VBL routine is not executed |vblsem $000454|word |Number of vertical blank routines |nvbls $000456|long |Pointer to list of vertical blank routines |_vblqueue $00045A|long |If not zero, points to color palette to be loaded |colorptr $00045E|long |If not zero, points to video ram for next VBL |screenpt $000462|long |Counter for number of VBLs |_vbclock $000466|long |Number of VBL routines executed |_frclock $00046A|long |Vector for hard disk initialization |hdv_init $00046E|long |Vector for resolution change |swv_vec $000472|long |Vector for getbpb for hard disk |hdv_bpb $000476|long |Vector for read/write routine for hard disk |hdv_rw $00047A|long |Vector for hard disk boot |hdv_boot $00047E|long |Vector for hard disk media change |hdv_mediach $000482|word |If not zero, attempt to load "COMMAND.PRG" on boot |_comload $000484|byte |Attribute vector for console output BIT 3 2 1 0|conterm | |Return "kbshift" for BIOS conin --------------' | | || | |System bell (1 - on) ---------------------------' | || | |Key repeat (1 - on) ------------------------------' || | |Key click (1 - on) ---------------------------------'| $000486|long |Return address for TRAP #14 (unused)|trp14ret $00048A|long |Return address for critical error handler (unused)|criticret $00048E|long |Memory descriptor block |themd $00049E|long |Space for additional memory descriptors |themdmd $0004A2|long |Pointer to BIOS save registers block |savptr $0004A6|word |Number of connected floppy drives |_nflops $0004A8|long |Vector for screen output |con_state $0004AC|word |Temporary storage for cursor line position |save_row $0004AE|long |Pointer to save area for exception processing |sav_context $0004B2|long |Pointer to buffer control block for GEMDOS data |_bufl $0004B6|long |Pointer to buffer control block for GEMDOS fat/dir |_bufl $0004BA|long |Counter for 200hz system clock |_hz_200 $0004BC|long |Pointer to default environment string |the_env $0004C2|long |Bit allocation for physical drives (bit 0=A, 1=B..) |_drvbits $0004C6|long |Pointer to 1024-byte disk buffer |_dskbufp $0004CA|long |Pointer to autoexecute path |_autopath $0004CE|long |Pointer to VBL routine #1 |_vbl_lis : | : | : : : : : | : $0004EA|long |Pointer to VBL routine #8 |_vbl_lis $0004EE|word |Flag for screen -> printer dump |_dumpflg $0004F0|word |Printer abort flag |_prtabt $0004F2|long |Pointer to start of OS |_sysbase $0004F6|long |Global shell pointer |_shell_p $0004FA|long |Pointer to end of OS |end_os $0004FE|long |Pointer to entry point of OS |exec_os $000502|long |Pointer to screen dump routine |scr_dump $000506|long |Pointer to _lstostat() |prv_lsto $00050A|long |Pointer to _lstout() |prv_lst $00050E|long |Pointer to _auxostat() |prv_auxo $000512|long |Pointer to _auxout() |prv_aux $000516|long |If AHDI, pointer to pun_info |pun_ptr $00051A|long |If $5555AAAA, reset |memval3 $00051E|long |8 Pointers to input-status routines |xconstat $00053E|long |8 Pointers to input routines |xconin $00055E|long |8 Pointers to output-status routines |xcostat $00057E|long |8 Pointers to output routines |xconout $00059E|word |If not 0, then not 68000 - use long stack frames |_longframe $0005A0|long |Pointer to cookie jar |_p_cookies $0005A4|long |Pointer to end of FastRam |ramtop $0005A8|long |Validates ramtop if $1357BD13 |ramvalid $0005AC|long |Pointer to routine for system bell |bell_hook $0005B0|long |Pointer to routine for system keyclick |kcl_hook -------+-----+-----------------------------------------------------+---------- Address Size Description Bits used Read/Write -------+-----+-----------------------------------------------------+---------- ##############OS ROMs ########### -------+-----+-----------------------------------------------------+---------- $E00000|byte |TOS 512k ROMs |R : | : | : : : |: $EFFFFF|byte |TOS 512k ROMs |R -------+-----+-----------------------------------------------------+---------- ##############ADSPEED Configuration registers ########### -------+-----+-----------------------------------------------------+---------- $F00000|byte |Switch to 16 Mhz |W $F10000|byte |Switch to 8 Mhz |W $F20000|byte |Turn on high speed ROM option in 16 Mhz |W $F30000|byte |Turn off high speed ROM option |W $F40000|byte |Unknown |W $F50000|byte |Turn off cache while in 16 Mhz |W | | >> Write 0 to an address to set it. << | -------+-----+-----------------------------------------------------+---------- ##############IDE Controller (Falcon, ST-Book, IDE cards) ########### -------+-----+-----------------------------------------------------+---------- $F00000|long |Data Register |R/W $F00005|byte |Error Register BIT 7 6 5 4 3 2 1 0|R | |Bad block mark -----------------------' | | | | | | || | |Uncorrectable error --------------------' | | | | | || | |Media change -----------------------------' | | | | || | |ID-Field not found -------------------------' | | | || | |Media change requested -----------------------' | | || | |Command aborted --------------------------------' | || | |Track 0 not found --------------------------------' || | |DAM not found --------------------------------------'| $F00009|byte |Sector Count Register |W $F0000D|byte |Sector Number Register |W $F00011|byte |Cylinder Low Register |W $F00015|byte |Cylinder High Register |W $F00019|byte |Drive Head Register |W $F0001D|byte |Status Register |R $F0001D|byte |Command Register |W $F00039|byte |Alternate Status Register |R $F00039|byte |Data Output Register |W -------+-----+-----------------------------------------------------+---------- ##############ST MMU Controller ########### -------+-----+-----------------------------------------------------+---------- $FF8001|byte |MMU memory configuration BIT 3 2 1 0|R/W | |Bank 0 | | | || | |00 - 128k ------------------------------------+-+ | || | |01 - 512k ------------------------------------+-+ | || | |10 - 2m --------------------------------------+-+ | || | |11 - reserved --------------------------------+-' | || | |Bank 1 | || | |00 - 128k ----------------------------------------+-+| | |01 - 512k ----------------------------------------+-+| | |10 - 2m ------------------------------------------+-+| | |11 - reserved ------------------------------------+-'| -------+-----+-----------------------------------------------------+---------- ##############Falcon030 Processor Control ########### -------+-----+-----------------------------------------------------+---------- $FF8007|byte |Falcon Bus Control BIT 5 . . 2 . 0|R/W (F030) | |STe Bus Emulation (0 - on) ---------------' | || | |Blitter (0 - 8mhz, 1 - 16mhz) ------------------' || | |68030 (0 - 8mhz, 1 - 16mhz) ------------------------'| -------+-----+-----------------------------------------------------+---------- ##############SHIFTER Video Controller ########### -------+-----+-----------------------------------------------------+---------- $FF8201|byte |Video screen memory position (High byte) |R/W $FF8203|byte |Video screen memory position (Mid byte) |R/W $FF820D|byte |Video screen memory position (Low byte) |R/W (STe) $FF8205|byte |Video address pointer (High byte) |R $FF8207|byte |Video address pointer (Mid byte) |R $FF8209|byte |Video address pointer (Low byte) |R $FF820E|word |Offset to next line |R/W (F030) $FF820F|byte |Width of a scanline (width in words-1) |R/W (STe) $FF8210|word |Width of a scanline (width in words) |R/W (F030) $FF8265|byte |Horizontal scroll register (0-15) |R/W (STe) | |Note: write address from high toward low byte | -------+-----+-----------------------------------------------------+---------- $FF820A|byte |Video synchronization mode BIT 1 0|R/W | |0 - 60hz, 1 - 50hz -------------------------------+ || | |0 - internal, 1 - external sync ------------------' || (TT) | |0 - internal, 1 - external sync --------------------'| (!TT) -------+-----+-----------------------------------------------------+---------- | | BIT 11111198 76543210| | | 543210 | | | ST color value .....RRr .GGr.BBb| | | STe color value ....rRRR gGGGbBBB| $FF8240|word |Video palette register 0 Lowercase = LSB|R/W : | : | : : : : | : $FF825E|word |Video palette register 15 |R/W -------+-----+-----------------------------------------------------+---------- $FF8260|byte |Shifter resolution BIT 1 0|R/W | |00 320x200x4 bitplanes (16 colors) ---------------+-+| | |01 640x200x2 bitplanes (4 colors) ----------------+-+| | |10 640x400x1 bitplane (1 colors) ----------------+-'| $FF8262|word |TT Shifter resolution BIT 15 . . 12|R/W (TT) | |Sample/Hold mode ----------------------------' || | |Hypermono mode -------------------------------------'| | |Video Mode BIT 10 9 8| | |000 320x200x4 bitplanes (16 colors) -----------+-+-+| | |001 640x200x2 bitplanes (4 colors) ------------+-+-+| | |010 640x400x1 bitplane (2 colors)(Duochrome) -+-+-+| | |100 640x480x4 bitplanes (16 colors) -----------+-+-+| | |110 1280x960x1 bitplane (2 colors) ------------+-+-+| | |111 320x480x8 bitplanes (256 colors) ----------+-+-'| | |ST Palette Bank BIT 3 2 1 0| -------+-----+-----------------------------------------------------+---------- $FF827E|???? |STACY Display Driver |???(STACY) -------+-----+-----------------------------------------------------+---------- | | BIT 11111198 76543210| | | 543210 | | | TT color value ....RRRr GGGgBBBb| $FF8400|word |TT Palette 0 Lowercase = LSB|R/W (TT) : | : | : : : | : : $FF85FE|word |TT Palette 255 |R/W (TT) -------+-----+-----------------------------------------------------+---------- ##############Falcon030 VIDEL Video Controller ########### -------+-----+-----------------------------------------------------+---------- $FF8006|byte |Monitor Type BIT 1 0|R (F030) | |00 - Monochrome (SM124) --------------------------+-+| | |01 - Color (SC1224) ------------------------------+-+| | |10 - VGA Color -----------------------------------+-+| | |11 - Television ----------------------------------+-'| $FF820E|word |Offset to next line |R/W (F030) $FF8210|word |VWRAP - Linewidth in words |R/W (F030) $FF8266|word |SPSHIFT BIT 10 . 8 . 6 5 4 3 2 1 0|R/W (F030) | |2-colour mode ------------------' | | | | | | | || | |Truecolour mode --------------------' | | | | | | || | |Use external hsync ---------------------' | | | | | || | |Use external vsync -----------------------' | | | | || | |8 Bitplane mode ----------------------------' | | | || | |? Bitplane mode ------------------------------' | | || | |? Bitplane mode --------------------------------' | || | |? Bitplane mode ----------------------------------' || | |? Bitplane mode ------------------------------------'| | +-----------------------------------------------------+ | | Horizontal Control Registers (9bit)| $FF8280|word |HHC - Horizontal Hold Counter |R (F030) $FF8282|word |HHT - Horizontal Hold Timer |R/W (F030) $FF8284|word |HBB - Horizontal Border Begin |R/W (F030) $FF8286|word |HBE - Horizontal Border End |R/W (F030) $FF8288|word |HDB - Horizontal Display Begin |R/W (F030) $FF828A|word |HDE - Horizontal Display End |R/W (F030) $FF828C|word |HSS - Horizontal SS |R/W (F030) $FF828E|word |HFS - Horizontal FS |R/W (F030) $FF8290|word |HEE - Horizontal EE |R/W (F030) | +-----------------------------------------------------+ | | Vertical Control Registers (10bit)| $FF82A0|word |VFC - Vertcial Frequency Counter |R (F030) $FF82A2|word |VFT - Vertical Frequency Timer |R/W (F030) $FF82A4|word |VBB - Vertical Border Begin (count in 1/2 lines)|R/W (F030) $FF82A6|word |VBE - Vertical Border End (count in 1/2 lines)|R/W (F030) $FF82A8|word |VDB - Vertical Display Begin |R/W (F030) $FF82AA|word |VDE - Vertical Display End |R/W (F030) $FF82AC|word |VSS - Vertical SS |R/W (F030) | +-----------------------------------------------------+ $FF82C0|word |??? - Video Clock (?) (Super78 puts $182 here) |R/W (F030) $FF82C2|word |VCO - Video Control BIT 3 2 1 0|R/W (F030) | |Quarter pixel width (quadruple pixels) -------' | | || | |Half pixel width (double pixels) ---------------' | || | |Skip line (interlace) ----------------------------' || | |Line doubling --------------------------------------'| -------+-----+-----------------------------------------------------+---------- ##############DMA/WD1772 Disk controller ########### -------+-----+-----------------------------------------------------+---------- $FF8600| |Reserved | $FF8602| |Reserved | $FF8604|word |FDC access/sector count |R/W $FF8606|word |DMA mode/status BIT 2 1 0|R | |Condition of FDC DATA REQUEST signal -----------' | || | |0 - sector count null,1 - not null ---------------' || | |0 - no error, 1 - DMA error ------------------------'| $FF8606|word |DMA mode/status BIT 8 7 6 . 4 3 2 1 .|W | |0 - read FDC/HDC,1 - write ---------' | | | | | | | | | |0 - HDC access,1 - FDC access --------' | | | | | | | | |0 - DMA on,1 - no DMA ------------------' | | | | | | | |Reserved ---------------------------------' | | | | | | |0 - FDC reg,1 - sector count reg -----------' | | | | | |0 - FDC access,1 - HDC access ----------------' | | | | |0 - pin A1 low, 1 - pin A1 high ----------------' | | | |0 - pin A0 low, 1 - pin A0 high ------------------' | $FF8609|byte |DMA base and counter (High byte) |R/W $FF860B|byte |DMA base and counter (Mid byte) |R/W $FF860D|byte |DMA base and counter (Low byte) |R/W | |Note: write address from low toward high byte | -------+-----+-----------------------------------------------------+---------- ##############TT-SCSI DMA Controller ########### -------+-----+-----------------------------------------------------+---------- $FF8701|byte |DMA Address Pointer (Highest byte) |R/W (TT) $FF8703|byte |DMA Address Pointer (High byte) |R/W (TT) $FF8705|byte |DMA Address Pointer (Low byte) |R/W (TT) $FF8707|byte |DMA Address Pointer (Lowest byte) |R/W (TT) $FF8709|byte |DMA Byte Count (Highest byte) |R/W (TT) $FF870B|byte |DMA Byte Count (High byte) |R/W (TT) $FF870D|byte |DMA Byte Count (Low byte) |R/W (TT) $FF870F|byte |DMA Byte Count (Lowest byte) |R/W (TT) $FF8710|word |Residue Data Register (High Word) |R (TT) $FF8712|word |Residue Data Register (Low Word) |R (TT) $FF8715|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT) | |Bus error ----------------------------' | | || | |Byte count zero ------------------------' | || | |Enable -------------------------------------------' || | |DMA Direction (1 - out to port) --------------------'| -------+-----+-----------------------------------------------------+---------- ##############TT-SCSI Drive Controller NCR 5380 ########### -------+-----+-----------------------------------------------------+---------- $FF8781|byte |Data register |R/W (TT) $FF8783|byte |Init-Command Register |R/W (TT) $FF8785|byte |Mode Register |R/W (TT) $FF8787|byte |Target-Command Register |R/W (TT) $FF8789|byte |ID Select/SCSI Control Register |R/W (TT) $FF878B|byte |Status Register |R/W (TT) $FF878D|byte |Target Receive/Input Data |R/W (TT) $FF878F|byte |Initiate Receive/Reset |R/W (TT) -------+-----+-----------------------------------------------------+---------- ##############YM2149 Sound Chip ########### -------+-----+-----------------------------------------------------+---------- $FF8800|byte |Read data/Register select |R/W | |0 Channel A Freq Low BIT 7 6 5 4 3 2 1 0| | |1 Channel A Freq High BIT 3 2 1 0| | |2 Channel B Freq Low BIT 7 6 5 4 3 2 1 0| | |3 Channel B Freq High BIT 3 2 1 0| | |4 Channel C Freq Low BIT 7 6 5 4 3 2 1 0| | |5 Channel C Freq High BIT 3 2 1 0| | |6 Noise Freq BIT 5 4 3 2 1 0| | |7 Mixer Control BIT 7 6 5 4 3 2 1 0| | | Port B IN/OUT (1=Output) -----------' | | | | | | || | | Port A IN/OUT ------------------------' | | | | | || | | Channel C Noise (1=Off) ----------------' | | | | || | | Channel B Noise --------------------------' | | | || | | Channel A Noise ----------------------------' | | || | | Channel C Tone (0=On) ------------------------' | || | | Channel B Tone ---------------------------------' || | | Channel A Tone -----------------------------------'| | |8 Channel A Amplitude Control BIT 4 3 2 1 0| | | Fixed/Variable Level (0=Fixed) -----------' | | | || | | Amplitude level control --------------------+-+-+-'| | |9 Channel B Amplitude Control BIT 4 3 2 1 0| | | Fixed/Variable Level ---------------------' | | | || | | Amplitude level control --------------------+-+-+-'| | |10 Channel C Amplitude Control BIT 4 3 2 1 0| | | Fixed/Variable Level ---------------------' | | | || | | Amplitude level control --------------------+-+-+-'| | |11 Envelope Period High BIT 7 6 5 4 3 2 1 0| | |12 Envelope Period Low BIT 7 6 5 4 3 2 1 0| | |13 Envelope Shape BIT 3 2 1 0| | | Continue -----------------------------------' | | || | | Attack ---------------------------------------' | || | | Alternate --------------------------------------' || | | Hold ---------------------------------------------'| | | 00xx - \____________________________________ | | | 01xx - /|___________________________________ | | | 1000 - \|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\|\ | | | 1001 - \____________________________________ | | | 1010 - \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ | | | 1011 - \|----------------------------------- | | | 1100 - /|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/|/ | | | 1101 - /------------------------------------ | | | 1110 - /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ | | | 1111 - /|___________________________________ | | |14 Port A BIT 7 6 5 4 3 2 1 0| | | IDE Drive On/OFF -------------------+ | | | | | | || (F030) | | SCC A (0=LAN, 1=Serial2) -----------' | | | | | | || (TT) | | Monitor jack GPO pin -----------------+ | | | | | || | | Internal Speaker On/Off --------------' | | | | | || (F030) | | Centronics strobe ----------------------' | | | | || | | RS-232 DTR output ------------------------' | | | || | | RS-232 RTS output --------------------------' | | || | | Drive select 1 -------------------------------' | || | | Drive select 0 ---------------------------------' || | | Drive side select --------------------------------'| | |15 Port B (Parallel port) | $FF8802|byte |Write data |W | +-----------------------------------------------------+ | |Note: PSG Registers are now fixed at these addresses.| | |All other addresses are masked out on the Falcon. Any| | |writes to the shadow registers $8804-$88FF will cause| | |bus errors. Game/Demo coders beware! | -------+-----+-----------------------------------------------------+---------- ##############DMA Sound System ########### -------+-----+-----------------------------------------------------+---------- $FF8900|byte |Buffer interrupts BIT 3 2 1 0|R/W (F030) | |TimerA-Int at end of record buffer -----------' | | || | |TimerA-Int at end of replay buffer -------------' | || | |MFP-15-Int (I7) at end of record buffer ----------' || | |MFP-15-Int (I7) at end of replay buffer ------------'| -------+-----+-----------------------------------------------------+---------- $FF8901|byte |DMA Control Register BIT 7 . 5 4 . . 1 0|R/W | |1 - select record register -----------+ | | | || (F030) | |0 - select replay register -----------' | | | || (F030) | |Loop record buffer -----------------------' | | || (F030) | |DMA Record on ------------------------------' | || (F030) | |Loop replay buffer -------------------------------' || (STe) | |DMA Replay on --------------------------------------'| (STe) -------+-----+-----------------------------------------------------+---------- $FF8903|byte |Frame start address (high byte) |R/W (STe) $FF8905|byte |Frame start address (mid byte) |R/W (STe) $FF8907|byte |Frame start address (low byte) |R/W (STe) $FF8909|byte |Frame address counter (high byte) |R (STe) $FF890B|byte |Frame address counter (mid byte) |R (STe) $FF890D|byte |Frame address counter (low byte) |R (STe) $FF890F|byte |Frame end address (high byte) |R/W (STe) $FF8911|byte |Frame end address (mid byte) |R/W (STe) $FF8913|byte |Frame end address (low byte) |R/W (STe) -------+-----+-----------------------------------------------------+---------- $FF8920|byte |DMA Track Control BIT 5 4 . . 1 0|R/W (F030) | |00 - Set DAC to Track 0 ------------------+-+ | || | |01 - Set DAC to Track 1 ------------------+-+ | || | |10 - Set DAC to Track 2 ------------------+-+ | || | |11 - Set DAC to Track 3 ------------------+-' | || | |00 - Play 1 Track --------------------------------+-+| | |01 - Play 2 Tracks -------------------------------+-+| | |10 - Play 3 Tracks -------------------------------+-+| | |11 - Play 4 Tracks -------------------------------+-'| -------+-----+-----------------------------------------------------+---------- $FF8921|byte |Sound mode control BIT 7 6 . . . . 1 0|R/W (STe) | |0 - Stereo, 1 - Mono -----------------' | | || | |0 - 8bit -------------------------------+ | || | |1 - 16bit (F030 only) ------------------' | || (F030) | |Frequency control bits | || | |00 - Off (F030 only) -----------------------------+-+| (F030) | |00 - 6258hz frequency (STe only) -----------------+-+| | |01 - 12517hz frequency ---------------------------+-+| | |10 - 25033hz frequency ---------------------------+-+| | |11 - 50066hz frequency ---------------------------+-'| | |Samples are always signed. In stereo mode, data is | | |arranged in pairs with high pair the left channel,low| | |pair right channel. Sample length MUST be even in | | |either mono or stereo mode. | | |Example: 8 bit Stereo : LRLRLRLRLRLRLRLR | | | 16 bit Stereo : LLRRLLRRLLRRLLRR (F030) | | |2 track 16 bit stereo : LLRRllrrLLRRllrr (F030) | -------+-----+-----------------------------------------------------+---------- ##############STe Microwire Controller (STe/TT only!) ########### -------+-----+-----------------------------------------------------+---------- $FF8922|byte |Microwire data register |R/W (Mwr) $FF8924|byte |Microwire mask register |R/W (Mwr) | +-----------------------------------------------------+ | |!! ATTENTION !! Microwire is now obsolete! It is not | | |present in the Falcon030 and is unlikely to be in any| | |future machines. You have been warned. | | +-----------------------------------------------------+ | |Volume/tone controller commands (Address %10)| | |Master Volume 10 011 DDDDDD| | |Left Volume 10 101 .DDDDD| | |Right Volume 10 100 .DDDDD| | |Treble 10 010 ..DDDD| | |Bass 10 001 ..DDDD| | |Mixer 10 000 ....DD| | +-----------------------------------------------------+ | |Volume/tone controller values | | |Master Volume : 0-40 (0 -80dB, 40=0dB) | | |Left/Right Volume : 0-20 (0 80dB, 20=0dB) | | |Treble/bass : 0-12 (0 -12dB, 12 +12dB) | | |Mixer : 0-3 (0 -12dB, 1 mix PSG) | | | (2 don't mix,3 reserved) | | +-----------------------------------------------------+ | |Procedure: Set mask register to $7ff. Read data | | |register and save original value.Write data register.| | |Compare data register with original value, repeat | | |until data register returns to original value to | | |ensure data has been sent over the interface. | | +-----------------------------------------------------+ | |Interrupts: Timer A can be set to interrupt at the | | |end of a frame. Alternatively, the GPI7 (MFP mono | | |detect) can be used to generate interrupts thereby | | |freeing up Timer A. In this case, the active edge | | |$FFFA03 must be set by or-ing the active edge of | | |$FFFA03 with the contents of $FF8260: | | |$FF8260 - 2 (mono) or.b #$80 with edge | | |$FF8260 - 0,1 (colour) and.b #$7F with edge | | |This will generate an interrupt at the START of a | | |frame, instead of at the end as with Timer A. To | | |generate an interrupt at the END of a frame, simply | | |reverse the edge values. | -------+-----+-----------------------------------------------------+---------- ##############Falcon030 DMA/DSP Controllers ########### -------+-----+-----------------------------------------------------+---------- $FF8930|word |Crossbar Source Controller |R/W (F030) | +-----------------------------------------------------+ | |Source: A/D Convertor BIT 15 14 13 12| | |1 - Connect, 0 - disconnect ---------------' | | || | |00 - 25.175Mhz clock -------------------------+--+ || | |01 - External clock --------------------------+--+ || | |10 - 32Mhz clock (Don't use) -----------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Source: External Input BIT 11 10 9 8| | |0 - DSP IN, 1 - All others ----------------' | | || | |00 - 25.175Mhz clock -------------------------+--+ || | |01 - External clock --------------------------+--+ || | |10 - 32Mhz clock -----------------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Source: DSP-XMIT BIT 7 6 5 4| | |0 - Tristate and disconnect DSP -----------+ | | || | | (Only for external SSI use) | | | || | |1 - Connect DSP to multiplexer ------------' | | || | |00 - 25.175Mhz clock -------------------------+--+ || | |01 - External clock --------------------------+--+ || | |10 - 32Mhz clock -----------------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Source: DMA-PLAYBACK BIT 3 2 1 0| | |0 - Handshaking on, dest DSP-REC ----------+ | | || | |1 - Destination is not DSP-REC ------------' | | || | |00 - 25.175Mhz clock -------------------------+--+ || | |01 - External clock --------------------------+--+ || | |10 - 32Mhz clock -----------------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| -------+-----+-----------------------------------------------------+---------- $FF8932|word |Crossbar Destination Controller |R/W (F030) | +-----------------------------------------------------+ | |Destination: D/A Convertor BIT 15 14 13 12| | |1 - Connect, 0 - Disconnect ---------------' | | || | |00 - Source DMA-PLAYBACK ---------------------+--+ || | |01 - Source DSP-XMIT -------------------------+--+ || | |10 - Source External Input -------------------+--+ || | |11 - Source A/D Convertor --------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Destination: External Output BIT 11 10 9 8| | |0 - DSP out, 1 - All others ---------------' | | || | |00 - Source DMA-PLAYBACK ---------------------+--+ || | |01 - Source DSP-XMIT -------------------------+--+ || | |10 - Source External Input -------------------+--+ || | |11 - Source A/D Convertor --------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Destination: DSP-RECORD BIT 7 6 5 4| | |0 - Tristate and disconnect DSP -----------+ | | || | | (Only for external SSI use) | | | || | |1 - Connect DSP to multiplexer ------------' | | || | |00 - Source DMA-PLAYBACK ---------------------+--+ || | |01 - Source DSP-XMIT -------------------------+--+ || | |10 - Source External Input -------------------+--+ || | |11 - Source A/D Convertor --------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| | +-----------------------------------------------------+ | |Destination: DMA-RECORD BIT 3 2 1 0| | |0 - Handshaking on, src DSP-XMIT ----------+ | | || | |1 - Source is not DSP-XMIT ----------------' | | || | |00 - Source DMA-PLAYBACK ---------------------+--+ || | |01 - Source DSP-XMIT -------------------------+--+ || | |10 - Source External Input -------------------+--+ || | |11 - Source A/D Convertor --------------------+--' || | |0 - Handshake on, 1 - Handshake off ----------------'| -------+-----+-----------------------------------------------------+---------- $FF8934|byte |Frequency Divider External Clock BIT 3 2 1 0|R/W (F030) | |0000 - STe-Compatible mode | | |0001 - 1111 Divide by 256 and then number | -------+-----+-----------------------------------------------------+---------- $FF8935|byte |Frequency Divider Internal Sync BIT 3 2 1 0|R/W (F030) | |0000 - STe-Compatible mode 1000 - 10927Hz* | | |0001 - 49170Hz 1001 - 9834Hz | | |0010 - 32780Hz 1010 - 8940Hz* | | |0011 - 24585Hz 1011 - 8195Hz | | |0100 - 19668Hz 1100 - 7565Hz* | | |0101 - 16390Hz 1101 - 7024Hz* | | |0110 - 14049Hz* 1110 - 6556Hz* | | |0111 - 12292Hz 1111 - 6146Hz* | | | * - Invalid for CODEC | -------+-----+-----------------------------------------------------+---------- $FF8936|byte |Record Tracks Select BIT 1 0|R/W (F030) | |00 - Record 1 Track ------------------------------+-+| | |01 - Record 2 Tracks -----------------------------+-+| | |10 - Record 3 Tracks -----------------------------+-+| | |11 - Record 4 Tracks -----------------------------+-'| -------+-----+-----------------------------------------------------+---------- $FF8937|byte |CODEC Input Source from 16bit adder BIT 1 0|R/W (F030) | |Source: Multiplexer ------------------------------' || | |Source: A/D Convertor ------------------------------'| -------+-----+-----------------------------------------------------+---------- $FF8938|byte |CODEC ADC-Input for L+R Channel BIT 1 0|R/W (F030) | |0 - Microphone, 1 - Soundchip L R| -------+-----+-----------------------------------------------------+---------- $FF8939|byte |Channel amplification BIT LLLL RRRR|R/W (F030) | | Amplification is in +1.5dB steps | -------+-----+-----------------------------------------------------+---------- $FF893A|word |Channel attenuation BIT LLLL RRRR|R/W (F030) | | Attenuation is in -1.5dB steps | -------+-----+-----------------------------------------------------+---------- $FF893C|byte |CODEC-Status BIT 1 0|R/W (F030) | |Left Channel Overflow ----------------------------' || | |Right Channel Overflow -----------------------------'| -------+-----+-----------------------------------------------------+---------- $FF8941|byte |GPx Data Direction BIT 2 1 0|R/W (F030) | |0 - In, 1 - Out --------------------------------+-+-'| | | For the GP0-GP2 pins on the DSP connector | -------+-----+-----------------------------------------------------+---------- $FF8943|byte |GPx Data Port BIT 2 1 0|R/W (F030) -------+-----+-----------------------------------------------------+---------- ##############TT Clock Chip (MC146818A @ 32.768 khz) ########### -------+-----+-----------------------------------------------------+---------- $FF8961|byte |Register select |W (TT) | |0 - Current Second | | |1 - Second for alarm | | |2 - Current Minute | | |3 - Minute for alarm | | |4 - Current Hour | | |5 - Hour for alarm | | |6 - Day of week (1=Sunday, 2=Monday, 3=...) | | |7 - Day of Month | | |8 - Month | | |9 - Year (example : '93' for this year) | | |A BIT 7| | | If set, update time in progress ----------------'| | | don't read time & date registers | | |B BIT 7 6 5 4 3 2 1 0| | |1 = Write Protect time & date --------' | | | | || | |1 = Enable alarm interrupt ---------------' | | | || | |1 = Interrupt after time updated -----------' | | || | |1 = Format Binary, 0 = Format BCD --------------' | || | |1 = 24hr format, 0 = 12hr format -----------------' || | |1 = Summer hours, 0 = Winter hours -----------------'| | |C BIT 6 5 4| | | ??? -------------------------------------------' | || | |1 = alarm is ringing -----------------------------' || | |1 = date is updated --------------------------------'| | |On interrupt, read this register to determine source.| | |D BIT 7| | |1 = Battery dead -----------------------------------'| $FF8963|byte |Register data |R/W (TT) -------+-----+-----------------------------------------------------+---------- ##############Blitter (Not present on TT!) ########### -------+-----+-----------------------------------------------------+---------- $FF8A00|word |Halftone-RAM, Word 0 |R/W (Blit) : | : | : : : : | : : $FF8A1E|word |Halftone-RAM, Word 15 |R/W (Blit) $FF8A20|word |Source X Increment (signed,even)|R/W (Blit) $FF8A22|word |Source Y Increment (signed,even)|R/W (Blit) $FF8A24|long |Source Address Register (24 bit,even)|R/W (Blit) $FF8A28|word |Endmask 1 (First write of a line)|R/W (Blit) $FF8A2A|word |Endmask 2 (All other line writes)|R/W (Blit) $FF8A2C|word |Endmask 3 (Last write of a line)|R/W (Blit) $FF8A2E|word |Destination X Increment (signed,even)|R/W (Blit) $FF8A30|word |Destination Y Increment (signed,even)|R/W (Blit) $FF8A32|long |Destination Address Register (24 bit,even)|R/W (Blit) $FF8A36|word |Words per Line in Bit-Block (0=65536)|R/W (Blit) $FF8A38|word |Lines per Bit-Block (0=65536)|R/W (Blit) $FF8A3A|byte |Halftone Operation Register BIT 1 0|R/W (Blit) | |00 - All ones ------------------------------------+-+| | |01 - Halftone ------------------------------------+-+| | |10 - Source --------------------------------------+-+| | |11 - Source AND Halftone -------------------------+-'| $FF8A3B|byte |Logical Operation Register BIT 3 2 1 0|R/W (Blit) | |0000 All zeros -------------------------------+-+-+-+| | |0001 Source AND destination ------------------+-+-+-+| | |0010 Source AND NOT destination --------------+-+-+-+| | |0011 Source ----------------------------------+-+-+-+| | |0100 NOT source AND destination --------------+-+-+-+| | |0101 Destination -----------------------------+-+-+-+| | |0110 Source XOR destination ------------------+-+-+-+| | |0111 Source OR destination -------------------+-+-+-+| | |1000 NOT source AND NOT destination ----------+-+-+-+| | |1001 NOT source XOR destination --------------+-+-+-+| | |1010 NOT destination -------------------------+-+-+-+| | |1011 Source OR NOT destination ---------------+-+-+-+| | |1100 NOT source ------------------------------+-+-+-+| | |1101 NOT source OR destination ---------------+-+-+-+| | |1110 NOT source OR NOT destination -----------+-+-+-+| | |1111 All ones --------------------------------+-+-+-'| $FF8A3C|byte |Line Number Register BIT 7 6 5 . 3 2 1 0|R/W (Blit) | |BUSY ---------------------------------' | | | | | || | |0 - Share bus, 1 - Hog bus -------------' | | | | || | |SMUDGE mode ------------------------------' | | | || | |Halftone line number -------------------------+-+-+-'| $FF8A3D|byte |SKEW Register BIT 7 6 . . 3 2 1 0|R/W (Blit) | |Force eXtra Source Read --------------' | | | | || | |No Final Source Read -------------------' | | | || | |Source skew ----------------------------------+-+-+-'| -------+-----+-----------------------------------------------------+---------- ##############SCC-DMA (TT Only!) ########### -------+-----+-----------------------------------------------------+---------- $FF8C01|byte |DMA Address Pointer (Highest Byte) |R/W (TT) $FF8C03|byte |DMA Address Pointer (High Byte) |R/W (TT) $FF8C05|byte |DMA Address Pointer (Low Byte) |R/W (TT) $FF8C07|byte |DMA Address Pointer (Lowest Byte) |R/W (TT) $FF8C09|byte |DMA Byte Count (Highest-Byte) |R/W (TT) $FF8C0B|byte |DMA Byte Count (High-Byte) |R/W (TT) $FF8C0D|byte |DMA Byte Count (Low-Byte) |R/W (TT) $FF8C0F|byte |DMA Byte Count (Lowest-Byte) |R/W (TT) $FF8C10|word |Residue Data Register (High-Word) |R (TT) $FF8C12|word |Residue Data register (Low-Word) |R (TT) $FF8C15|byte |Control register BIT 7 6 . . . . 1 0|R/W (TT) | |Bus error ----------------------------' | | || | |Byte count zero ------------------------' | || | |Enable -------------------------------------------' || | |DMA Direction (1 - out to port) --------------------'| -------+-----+-----------------------------------------------------+---------- ##############Zilog 8530 SCC (MSTe/TT/F030) ########### -------+-----+-----------------------------------------------------+---------- $FF8C81|byte |Channel A - Control Register |R/W (SCC) $FF8C83|byte |Channel A - Data Register |R/W (SCC) $FF8C85|byte |Channel B - Control Register |R/W (SCC) $FF8C87|byte |Channel B - Data Register |R/W (SCC) -------+-----+-----------------------------------------------------+---------- ##############VME Bus System Control Unit (MSTe/TT) ########### -------+-----+-----------------------------------------------------+---------- $FF8E01|byte |VME sys_mask BIT 7 6 5 4 . 2 1 .|R/W (VME) $FF8E03|byte |VME sys_stat BIT 7 6 5 4 . 2 1 .|R (VME) | |_SYSFAIL in VMEBUS -------------------' | | | | | |program | |MFP ------------------------------------' | | | | |autovec | |SCC --------------------------------------' | | | |autovec | |VSYNC --------------------------------------' | | |program | |HSYNC ------------------------------------------' | |program | |System software INT ------------------------------' |program | +-----------------------------------------------------+ | |Reading sys_mask resets pending int-bits in sys_stat,| | |so read sys_stat first. | -------+-----+-----------------------------------------------------+---------- $FF8E05|byte |VME sys_int BIT 0|R/W (VME) | |Setting bit 0 to 1 forces an INT of level 1. INT must|Vector $64 | |be enabled in sys_mask to use it. | -------+-----+-----------------------------------------------------+---------- $FF8E0D|byte |VME vme_mask BIT 7 6 5 4 3 2 1 .|R/W (VME) $FF8E0F|byte |VME vme_stat BIT 7 6 5 4 3 2 1 .|R (VME) | |_IRQ7 from VMEBUS --------------------' | | | | | | |program | |_IRQ6 from VMEBUS/MFP ------------------' | | | | | |program | |_IRQ5 from VMEBUS/SCC --------------------' | | | | |program | |_IRQ4 from VMEBUS --------------------------' | | | |program | |_IRQ3 from VMEBUS/soft -----------------------' | | |prog/autov | |_IRQ2 from VMEBUS ------------------------------' | |program | |_IRQ1 from VMEBUS --------------------------------' |program | +-----------------------------------------------------+ | |MFP-int and SCC-int are hardwired to the VME-BUS-ints| | |(or'ed). Reading vme_mask resets pending int-bits in | | |vme_stat, so read vme_stat first. | -------+-----+-----------------------------------------------------+---------- $FF8E07|byte |VME vme_int BIT 0|R/W (TT) | |Setting bit 0 to 1 forces an INT of level 3. INT must|Vector $6C | |be enabled in vme_mask to use it. | -------+-----+-----------------------------------------------------+---------- $FF8E09|byte |General purpose register - does nothing |R/W (TT) $FF8E0B|byte |General purpose register - does nothing |R/W (TT) -------+-----+-----------------------------------------------------+---------- ##############Mega STe Cache/Processor Control ########### -------+-----+-----------------------------------------------------+---------- $FF8E21|byte |Mega STe Cache/Processor Control BIT 15-1 0|R/W (MSTe) | |Cache enable lines (set all to 1 to enable) -----' || | |CPU Speed (0 - 8mhz, 1 - 16mhz) --------------------'| -------+-----+-----------------------------------------------------+---------- ##############STe/F030 Extended Joystick/Lightpen Ports ########### -------+-----+-----------------------------------------------------+---------- $FF9200|word |Fire buttons 1-4 Bit 3 2 1 0|R (Ext) | |Pause/F0 -------------------------------------' | | || | |F1 ---------------------------------------------' | || | |F2 -----------------------------------------------' || | |Option/F3 ------------------------------------------'| $FF9202|word |Read Mask (0 - pin read) |W (Ext) $FF9202|word |Joystick Inputs BIT 7 6 5 4 3 2 1 0|R (Ext) | |Controller 1 pin 4 -------------------' | | | | | | || | |Controller 1 pin 3 ---------------------' | | | | | || | |Controller 1 pin 2 -----------------------' | | | | || | |Controller 1 pin 1 -------------------------' | | | || | |Controller 0 pin 4 ---------------------------' | | || | |Controller 0 pin 3/Paddle 1 Trigger ------------' | || | |Controller 0 pin 2/Paddle 0 Trigger --------------' || | |Controller 0 pin 1 ---------------------------------'| | | BIT 15 14 13 12 11 10 9 8| | |Controller 1 pin 14 ------------' | | | | | | || | |Controller 1 pin 13 ----------------' | | | | | || | |Controller 1 pin 12 -------------------' | | | | || | |Controller 1 pin 11 ----------------------' | | | || | |Controller 0 pin 14 -------------------------' | | || | |Controller 0 pin 13 ----------------------------' | || | |Controller 0 pin 12 ------------------------------' || | |Controller 0 pin 11 --------------------------------'| $FF9210|word |X Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9212|word |Y Paddle 0 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9214|word |X Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9216|word |Y Paddle 1 Position BIT 7 6 5 4 3 2 1 0|R (Ext) $FF9220|word |Lightpen X-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext) $FF9222|word |Lightpen Y-Position BIT 9 8 7 6 5 4 3 2 1 0|R (Ext) -------+-----+-----------------------------------------------------+---------- ##############Falcon VIDEL Palette Registers ########### -------+-----+-----------------------------------------------------+---------- | | BIT 33222222 22221111 11111198 76543210| | | 10987654 32109876 543210 | | | RRRRRr.. GGGGGg.. ........ BBBBBb..| $FF9800|long |Palette Register 0 Lowercase = LSB|R/W (F030) : | : | : : : | : : $FF98FC|long |Palette Register 255 |R/W (F030) -------+-----+-----------------------------------------------------+---------- ##############Falcon DSP Host Interface ########### -------+-----+-----------------------------------------------------+---------- $FFA200|byte |Interrupt Ctrl Register BIT 7 6 5 4 3 . 1 0|R/W (F030) X:$FFE9| |INIT bit -----------------------------' | | | | | || | |00 - Interupt mode (DMA off) -----------+-+ | | | || | |01 - 24-bit DMA mode -------------------+-+ | | | || | |10 - 16-bit DMA mode -------------------+-+ | | | || | |11 - 8-bit DMA mode --------------------+-' | | | || | |Host Flag 1 --------------------------------' | | || | |Host Flag 0 ----------------------------------' | || | | Host mode Data transfers: | || | | Interrupt mode | || | |00 - No interrupts (Polling) ---------------------+-+| | |01 - RXDF Request (Interrupt) --------------------+-+| | |10 - TXDE Request (Interrupt) --------------------+-+| | |11 - RXDF and TXDE Request (Interrupts) ----------+-+| | | DMA Mode | || | |00 - No DMA --------------------------------------+-+| | |01 - DSP to Host Request (RX) --------------------+-+| | |10 - Host to DSP Request (TX) --------------------+-+| | |11 - Undefined (Illegal) -------------------------+-'| $FFA201|byte |Command Vector Register BIT 7 . . 4 3 2 1 0|R/W (F030) X:$FFE9| |Host Command Bit (Handshake)----------' | | | | || | |Host Vector (0-31) -------------------------+-+-+-+-'| $FFA202|byte |Interrupt Status Reg BIT 7 6 . 4 3 2 1 0|R (F030) X:$FFE8| |ISR Host Request ---------------------' | | | | | || | |ISR DMA Status -------------------------' | | | | || | |Host Flag 3 --------------------------------' | | | || | |Host Flag 2 ----------------------------------' | | || | |ISR Transmitter Ready (TRDY) -------------------' | || | |ISR Transmit Data Register Empty (TXDE) ----------' || | |ISR Receive Data Register Full (RXDF) --------------'| $FFA203|byte |Interrupt Vector Register |R/W (F030) $FFA204|byte |Unused | (F030) $FFA205|byte |DSP-Word High |R/W (F030) X:$FFEB| | | $FFA206|byte |DSP-Word Mid |R/W (F030) X:$FFEB| | | $FFA207|byte |DSP-Word Low |R/W (F030) X:$FFEB| | | -------+-----+-----------------------------------------------------+---------- ##############MFP 68901 - Multi Function Peripheral Chip ########### -------+-----+-----------------------------------------------------+---------- | | MFP Master Clock is 2,457,600 cycles/second | -------+-----+-----------------------------------------------------+---------- $FFFA01|byte |Parallel Port Data Register |R/W -------+-----+-----------------------------------------------------+---------- $FFFA03|byte |Active Edge Register BIT 7 6 5 4 . 2 1 0|R/W | |Monochrome monitor detect ------------' | | | | | | || | |RS-232 Ring indicator ------------------' | | | | | || | |FDC/HDC interrupt ------------------------' | | | | || | |Keyboard/MIDI interrupt --------------------' | | | || | |Reserved -------------------------------------' | | || | |RS-232 CTS (input) -----------------------------' | || | |RS-232 DCD (input) -------------------------------' || | |Centronics busy ------------------------------------'| | +-----------------------------------------------------+ | | When port bits are used for input only: | | |0 - Interrupt on pin high-low conversion | | |1 - Interrupt on pin low-high conversion | -------+-----+-----------------------------------------------------+---------- $FFFA05|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W | |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'| -------+-----+-----------------------------------------------------+---------- $FFFA07|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W $FFFA0B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W $FFFA0F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W $FFFA13|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W | |MFP Address | | | | | | | || | |$13C GPI7-Monochrome Detect ----------' | | | | | | || | |$138 RS-232 Ring Detector ------------' | | | | | || | |$134 (STe sound) Timer A --------------' | | | | || | |$130 Receive buffer full ----------------' | | | || | |$12C Receive error ------------------' | | || | |$128 Send buffer empty --------------------' | || | |$124 Send error ----------------------' || | |$120 (HBL) Timer B ------------------------'| | |1 - Enable Interrupt 0 - Disable Interrupt| -------+-----+-----------------------------------------------------+---------- $FFFA09|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W $FFFA0D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W $FFFA11|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W $FFFA15|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W | |MFP Address | | | | | | | || | |$11C FDC/HDC ----------' | | | | | | || | |$118 Keyboard/MIDI ------------' | | | | | || | |$114 (200hz clock) Timer C --------------' | | | | || | |$110 (USART timer) Timer D ----------------' | | | || | |$10C Blitter done ------------------' | | || | |$108 RS-232 CTS - input --------------------' | || | |$104 RS-232 DCD - input ----------------------' || | |$100 Centronics Busy ------------------------'| | |1 - Enable Interrupt 0 - Disable Interrupt| -------+-----+-----------------------------------------------------+---------- $FFFA17|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W | |Vector Base Offset -------------------+-+-+-' | | | |1 - *Software End-interrupt mode -------------+ | | |0 - Automatic End-interrupt mode -------------' | | |* - Default operating mode | -------+-----+-----------------------------------------------------+---------- $FFFA19|byte |Timer A Control BIT 4 3 2 1 0|R/W $FFFA1B|byte |Timer B Control BIT 4 3 2 1 0|R/W | |Reset (force output low) -------------------' | | | || | +----------------------------------------------+-+-+-++ | |0000 - Timer stop, no function executed | | |0001 - Delay mode, divide by 4 | | |0010 - : : 10 | | |0011 - : : 16 | | |0100 - : : 50 | | |0101 - : : 64 | | |0110 - : : 100 | | |0111 - Delay mode, divide by 200 | | |1000 - Event count mode | | |1xxx - Pulse extension mode, divide as above | | +-----------------------------------------------------+ $FFFA1F|byte |Timer A Data |R/W $FFFA21|byte |Timer B Data |R/W -------+-----+-----------------------------------------------------+---------- $FFFA1D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W | | Timer Timer| | | C D | | +-----------------------------------------------------+ | |000 - Timer stop | | |001 - Delay mode, divide by 4 | | |010 - : : 10 | | |011 - : : 16 | | |100 - : : 50 | | |101 - : : 64 | | |110 - : : 100 | | |111 - Delay mode, divide by 200 | | +-----------------------------------------------------+ $FFFA23|byte |Timer C Data |R/W $FFFA25|byte |Timer D Data |R/W -------+-----+-----------------------------------------------------+---------- $FFFA27|byte |Sync Character |R/W $FFFA29|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W | |Clock divide (1 - div by 16) ---------' | | | | | | || | |Word Length 00 - 8 bits ----------------+-+ | | | | || | | 01 - 7 bits ----------------+-+ | | | | || | | 10 - 6 bits ----------------+-+ | | | | || | | 11 - 5 bits ----------------+-' | | | | || | |Bits Stop Start Format | | | | || | |00 0 0 Synchronous ----------------+-+ | | || | |01 1 1 Asynchronous ---------------+-+ | | || | |10 1 1.5 Asynchronous ---------------+-+ | | || | |11 1 2 Asynchronous ---------------+-' | | || | |Parity (0 - ignore parity bit) -----------------' | || | |Parity (0 - odd parity,1 - even) -----------------' || | |Unused ---------------------------------------------'| $FFFA2B|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W | |Buffer full --------------------------' | | | | | | || | |Overrun error --------------------------' | | | | | || | |Parity error -----------------------------' | | | | || | |Frame error --------------------------------' | | | || | |Found - Search/Break detected ----------------' | | || | |Match/Character in progress --------------------' | || | |Synchronous strip enable -------------------------' || | |Receiver enable bit --------------------------------'| $FFFA2D|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W | |Buffer empty -------------------------' | | | | | | || | |Underrun error -------------------------' | | | | | || | |Auto turnaround --------------------------' | | | | || | |End of transmission ------------------------' | | | || | |Break ----------------------------------------' | | || | |High bit ---------------------------------------' | || | |Low bit ------------------------------------------' || | |Transmitter enable ---------------------------------'| $FFFA2F|byte |USART data |R/W -------+-----+-----------------------------------------------------+---------- ##############Floating Point Coprocessor (CIR Interface in MSTe) ########### -------+-----+-----------------------------------------------------+---------- $FFFA40|word |FP_Stat Response-Register |??? (MSTe) $FFFA42|word |FP_Ctl Control-Register |??? (MSTe) $FFFA44|word |FP_Save Save-Register |??? (MSTe) $FFFA46|word |FP_Restor Restore-Register |??? (MSTe) $FFFA48|word | |??? (MSTe) $FFFA4A|word |FP_Cmd Command-Register |??? (MSTe) $FFFA4E|word |FP_Ccr Condition-Code-Register |??? (MSTe) $FFFA50|long |FP_Op Operand-Register |??? (MSTe) $FFFA54|word |FP_Selct Register Select |??? (MSTe) $FFFA58|long |FP_Iadr Instruction Address |??? (MSTe) $FFFA5C|long | Operand Address |??? (MSTe) -------+-----+-----------------------------------------------------+---------- ##############MFP 68901 #2 (MFP2) - TT Only ########### -------+-----+-----------------------------------------------------+---------- $FFFA81|byte |Parallel Port Data Register |R/W (TT) -------+-----+-----------------------------------------------------+---------- $FFFA83|byte |Active Edge Register BIT 7 6 5 4 3 2 1 0|R/W (TT) | +-----------------------------------------------------+ | | When port bits are used for input only: | | |0 - Interrupt on pin high-low conversion | | |1 - Interrupt on pin low-high conversion | -------+-----+-----------------------------------------------------+---------- $FFFA85|byte |Data Direction BIT 7 6 5 4 3 2 1 0|R/W (TT) | |0 - In, 1 - Out ----------------------+-+-+-+-+-+-+-'| -------+-----+-----------------------------------------------------+---------- $FFFA87|byte |Interrupt Enable A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8B|byte |Interrupt Pending A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8F|byte |Interrupt In-service A BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA93|byte |Interrupt Mask A BIT 7 6 5 4 3 2 1 0|R/W (TT) | |MFP Address | | | | | | | || | |$17C TT-SCSI NCR5380 ---------' | | | | | | || | |$178 RTC (MC146818A) -----------' | | | | | || | |$174 Timer A -------------' | | | | || | |$170 Receive buffer full ---------------' | | | || | |$16C Receive error -----------------' | | || | |$168 Send buffer empty -------------------' | || | |$164 Send error ---------------------' || | |$160 Timer B -----------------------'| | |1 - Enable Interrupt 0 - Disable Interrupt| -------+-----+-----------------------------------------------------+---------- $FFFA89|byte |Interrupt Enable B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA8D|byte |Interrupt Pending B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA91|byte |Interrupt In-service B BIT 7 6 5 4 3 2 1 0|R/W (TT) $FFFA95|byte |Interrupt Mask B BIT 7 6 5 4 3 2 1 0|R/W (TT) | |MFP Address | | | | | | | || | |$15C SCSI DMA Controller ---------' | | | | | | || | |$158 (Reserved) GPIP 4 -----------' | | | | | || | |$154 Timer C -------------' | | | | || | |$150 Timer D ---------------' | | | || | |$14C SCC B Ring Indicator -----------------' | | || | |$148 SCC DMA Controller -------------------' | || | |$144 General Purpose Input 1 ---------------------' || | |$140 General Purpose Input 0 -----------------------'| | |1 - Enable Interrupt 0 - Disable Interrupt| -------+-----+-----------------------------------------------------+---------- $FFFA97|byte |Vector Register BIT 7 6 5 4 3 . . .|R/W (TT) | |Vector Base Offset -------------------+-+-+-' | | | |1 - *Software End-interrupt mode -------------+ | | |0 - Automatic End-interrupt mode -------------' | | |* - Default operating mode | -------+-----+-----------------------------------------------------+---------- $FFFA99|byte |Timer A Control BIT 4 3 2 1 0|R/W (TT) $FFFA9B|byte |Timer B Control BIT 4 3 2 1 0|R/W (TT) | |Reset (force output low) -------------------' | | | || | +----------------------------------------------+-+-+-++ | |0000 - Timer stop, no function executed | | |0001 - Delay mode, divide by 4 | | |0010 - : : 10 | | |0011 - : : 16 | | |0100 - : : 50 | | |0101 - : : 64 | | |0110 - : : 100 | | |0111 - Delay mode, divide by 200 | | |1000 - Event count mode | | |1xxx - Pulse extension mode, divide as above | | +-----------------------------------------------------+ $FFFA9F|byte |Timer A Data |R/W (TT) $FFFAA1|byte |Timer B Data |R/W (TT) -------+-----+-----------------------------------------------------+---------- $FFFA9D|byte |Timer C & D Control BIT 6 5 4 . 2 1 0|R/W (TT) | | Timer Timer| | | C D | | +-----------------------------------------------------+ | |000 - Timer stop | | |001 - Delay mode, divide by 4 | | |010 - : : 10 | | |011 - : : 16 | | |100 - : : 50 | | |101 - : : 64 | | |110 - : : 100 | | |111 - Delay mode, divide by 200 | | +-----------------------------------------------------+ $FFFAA3|byte |Timer C Data |R/W (TT) $FFFAA5|byte |Timer D Data |R/W (TT) -------+-----+-----------------------------------------------------+---------- $FFFAA7|byte |Sync Character |R/W (TT) $FFFAA9|byte |USART Control BIT 7 6 5 4 3 2 1 .|R/W (TT) | |Clock divide (1 - div by 16) ---------' | | | | | | || | |Word Length 00 - 8 bits ----------------+-+ | | | | || | | 01 - 7 bits ----------------+-+ | | | | || | | 10 - 6 bits ----------------+-+ | | | | || | | 11 - 5 bits ----------------+-' | | | | || | |Bits Stop Start Format | | | | || | |00 0 0 Synchronous ----------------+-+ | | || | |01 1 1 Asynchronous ---------------+-+ | | || | |10 1 1.5 Asynchronous ---------------+-+ | | || | |11 1 2 Asynchronous ---------------+-' | | || | |Parity (0 - ignore parity bit) -----------------' | || | |Parity (0 - odd parity,1 - even) -----------------' || | |Unused ---------------------------------------------'| $FFFAAB|byte |Receiver Status BIT 7 6 5 4 3 2 1 0|R/W (TT) | |Buffer full --------------------------' | | | | | | || | |Overrun error --------------------------' | | | | | || | |Parity error -----------------------------' | | | | || | |Frame error --------------------------------' | | | || | |Found - Search/Break detected ----------------' | | || | |Match/Character in progress --------------------' | || | |Synchronous strip enable -------------------------' || | |Receiver enable bit --------------------------------'| $FFFAAD|byte |Transmitter Status BIT 7 6 5 4 3 2 1 0|R/W (TT) | |Buffer empty -------------------------' | | | | | | || | |Underrun error -------------------------' | | | | | || | |Auto turnaround --------------------------' | | | | || | |End of transmission ------------------------' | | | || | |Break ----------------------------------------' | | || | |High bit ---------------------------------------' | || | |Low bit ------------------------------------------' || | |Transmitter enable ---------------------------------'| $FFFAAF|byte |USART data |R/W (TT) -------+-----+-----------------------------------------------------+---------- ##############6850 ACIA I/O Chips ########### -------+-----+-----------------------------------------------------+---------- $FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|W | |Rx Int enable (1 - enable) -----------' | | | | | | || | |Tx Interrupts | | | | | | || | |00 - RTS low, Tx int disable -----------+-+ | | | | || | |01 - RTS low, Tx int enable ------------+-+ | | | | || | |10 - RTS high, Tx int disable ----------+-+ | | | | || | |11 - RTS low, Tx int disable, | | | | | | || | | Tx a break onto data out ----------+-' | | | | || | |Settings | | | | || | |000 - 7 bit, even, 2 stop bit --------------+-+-+ | || | |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | || | |010 - 7 bit, even, 1 stop bit --------------+-+-+ | || | |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | || | |100 - 8 bit, 2 stop bit --------------------+-+-+ | || | |101 - 8 bit, 1 stop bit --------------------+-+-+ | || | |110 - 8 bit, even, 1 stop bit --------------+-+-+ | || | |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | || | |Clock divide | || | |00 - Normal --------------------------------------+-+| | |01 - Div by 16 -----------------------------------+-+| | |10 - Div by 64 -----------------------------------+-+| | |11 - Master reset --------------------------------+-'| $FFFC00|byte |Keyboard ACIA control BIT 7 6 5 4 3 2 1 0|R | |Interrupt request --------------------' | | | | | | || | |Parity error ---------------------------' | | | | | || | |Rx overrun -------------------------------' | | | | || | |Framing error ------------------------------' | | | || | |CTS ------------------------------------------' | | || | |DCD --------------------------------------------' | || | |Tx data register empty ---------------------------' || | |Rx data register full ------------------------------'| $FFFC02|byte |Keyboard ACIA data |R/W $FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|W | |Rx Int enable (1 - enable) -----------' | | | | | | || | |Tx Interrupts | | | | | | || | |00 - RTS low, Tx int disable -----------+-+ | | | | || | |01 - RTS low, Tx int enable ------------+-+ | | | | || | |10 - RTS high, Tx int disable ----------+-+ | | | | || | |11 - RTS low, Tx int disable, | | | | | | || | | Tx a break onto data out ----------+-' | | | | || | |Settings | | | | || | |000 - 7 bit, even, 2 stop bit --------------+-+-+ | || | |001 - 7 bit, odd, 2 stop bit ---------------+-+-+ | || | |010 - 7 bit, even, 1 stop bit --------------+-+-+ | || | |011 - 7 bit, odd, 1 stop bit ---------------+-+-+ | || | |100 - 8 bit, 2 stop bit --------------------+-+-+ | || | |101 - 8 bit, 1 stop bit --------------------+-+-+ | || | |110 - 8 bit, even, 1 stop bit --------------+-+-+ | || | |111 - 8 bit, odd, 1 stop bit ---------------+-+-' | || | |Clock divide | || | |00 - Normal --------------------------------------+-+| | |01 - Div by 16 -----------------------------------+-+| | |10 - Div by 64 -----------------------------------+-+| | |11 - Master reset --------------------------------+-'| $FFFC04|byte |MIDI ACIA control BIT 7 6 5 4 3 2 1 0|R | |Interrupt request --------------------' | | | | | | || | |Parity error ---------------------------' | | | | | || | |Rx overrun -------------------------------' | | | | || | |Framing error ------------------------------' | | | || | |CTS ------------------------------------------' | | || | |DCD --------------------------------------------' | || | |Tx data register empty ---------------------------' || | |Rx data register full ------------------------------'| $FFFC06|byte |MIDI ACIA data |R/W -------+-----+-----------------------------------------------------+---------- ##############Realtime Clock ########### -------+-----+-----------------------------------------------------+---------- $FFFC21|byte |S_Units |??? $FFFC23|byte |S_Tens |??? $FFFC25|byte |M_Units |??? $FFFC27|byte |M_Tens |??? $FFFC29|byte |H_Units |??? $FFFC2B|byte |H_Tens |??? $FFFC2D|byte |Weekday |??? $FFFC2F|byte |Day_Units |??? $FFFC31|byte |Day_Tens |??? $FFFC33|byte |Mon_Units |??? $FFFC35|byte |Mon_Tens |??? $FFFC37|byte |Yr_Units |??? $FFFC39|byte |Yr_Tens |??? $FFFC3B|byte |Cl_Mod |??? $FFFC3D|byte |Cl_Test |??? $FFFC3F|byte |Cl_Reset |??? -------+-----+-----------------------------------------------------+---------- ##############ROM ########### -------+-----+-----------------------------------------------------+---------- $FA0000| | | : | |128K ROM expansion cartridge port |R $FBFFFF| | | -------+-----+-----------------------------------------------------+---------- $FC0000| | | : | |192K System ROM |R $FEFFFF| | | -------+-----+-----------------------------------------------------+---------- Atari 32 bit Memory Map Addresses Description -------------------+---------------------------------------------------------- $00000000-$00DFFFFF|ST RAM $00E00000-$00EFFFFF|512k TOS ROMs (STE+) $00F00000-$00F9FFFF|Reserved I/O Space $00FA0000-$00FBFFFF|128k ROM cartridge expansion port $00FC0000-$00FEFFFF|192k System ROM (STF) $00FF0000-$00FF7FFF|Reserved I/O Space $00FF8000-$00FFFFFF|ST/TT I/O $01000000-$013FFFFF|TT Fast Ram $01400000-$FDFFFFFF|Reserved $FE000000-$FEFFFFFF|VME A24/D16 (MSTE/TT ?) $FEFF0000-$FEFFFFFF|VME A16/D16 (MSTE/TT ?) $FF000000-$FFFFFFFF|ST 24 bit compatible shadow $FFD000xx-$FFD000xx|Set FastRAM refresh rate and generate a bus error -------------------+---------------------------------------------------------- Cookie Jar Atari "Official" Cookies Cookie Description -------+---------------------------------------------------------------------- _CPU | CPU Type Bit 7 6 5 4 3 2 1 0 | Processor type is represented in decimal in the lowest byte. | (0 - 68000, 40 - 68040) -------+---------------------------------------------------------------------- _VDO | Video Type BIT 17 16 | Shifter Type | | | 00 - ST ---------------------------------------------------------+--+ | 01 - STe --------------------------------------------------------+--+ | 10 - TT ---------------------------------------------------------+--+ | 11 - Falcon030 --------------------------------------------------+--' -------+---------------------------------------------------------------------- _FDC | Floppy Drive Controller BIT 25 24 . 23-0 | Floppy Format | | | | 00 - DD (Normal floppy interface) ------------------------+--+ | | 01 - HD (1.44 MB with 3.5") ------------------------------+--+ | | 10 - ED (2.88 MB with 3.5") ------------------------------+--' | | Controller ID | | 0 - No information available | | 'ATC' - Fully compatible interface built in a way that -------------+ | behaves like part of the system. | | 'DP1' - "DreamPark Development", all ID's beginning with -----------' | "DP" are reserved for Dreampark. -------+---------------------------------------------------------------------- _FLK | File Locking | If present, GEMDOS supports file locking. Value represents version | number of the expansion. -------+---------------------------------------------------------------------- _NET | Network Type | If present, there is GEMDOS network support. Points to 2 longs: | The first is the ID of the producer, and the second is the version | number. -------+---------------------------------------------------------------------- _SLM | SLM Driver | Diablo-driver for the SLM laser printer. Value points to a | non-documented structure. -------+---------------------------------------------------------------------- _INF | .INF Patch | When present, STEFIX (patch program for TOS 1.06) is active. -------+---------------------------------------------------------------------- _SND | Sound Hardware BIT 5 4 3 2 1 0 | CodeC (??) -----------------------------------------------' | | | | | | Connection Matrix ------------------------------------------' | | | | | DSP56001 -----------------------------------------------------' | | | | 16 Bit DMA Sound -----------------------------------------------' | | | 8 Bit DMA Sound --------------------------------------------------' | | YM2149 -------------------------------------------------------------' -------+---------------------------------------------------------------------- _MCH | Machine Type BIT 17 16 | 00 - ST/Mega ST -------------------------------------------------+--+ | 01 - STe & Compatible Machines (See Below) ----------------------+--+ | 10 - TT ---------------------------------------------------------+--+ | 11 - Falcon030 --------------------------------------------------+--' | STe & Compatible Machines BIT 5 4 3 2 1 0 | 00000 - STe ----------------------------------------------+-+-+-+-+-+ | 00001 - ST Book ------------------------------------------+-+-+-+-+-+ | 10000 - Mega STe -----------------------------------------+-+-+-+-+-' -------+---------------------------------------------------------------------- _SWI | Configuration Switches | State of configuration switches (MSTe/TT only) -------+---------------------------------------------------------------------- _FRB | Fast Ram Buffer | (TT specific) 64k buffer for ACSI DMA | 0 - no buffers assigned Not 0 - address of FastRam buffer -------+---------------------------------------------------------------------- _FPU | FPU Type | Software FPU BIT 3 2 1 0 | 68040's internal FPU -----------------------------------------' | | | | 01 - 6888x present ---------------------------------------------+-+ | | 10 - 68881 for sure --------------------------------------------+-+ | | 11 - 68882 for sure --------------------------------------------+-' | | SFP004 present -----------------------------------------------------' | Hardware FPU BIT 11 10 9 8 | 68040's internal FPU ----------------------------------------' | | | | 01 - 6888x present ---------------------------------------------+-+ | | 10 - 68881 for sure --------------------------------------------+-+ | | 11 - 68882 for sure --------------------------------------------+-' | | SFP004 present -----------------------------------------------------' -------+---------------------------------------------------------------------- _OOL | PoolFix | Value corresponds to PoolFix version -------+---------------------------------------------------------------------- _AKP | Keyboard/Language Configuration | Keyboard Configuration Bit 15-8 | 1 - German 5 - Italian -------------------------------------------+ | 2 - French 7 - Swiss French --------------------------------------+ | 4 - Spanish 8 - Swiss German --------------------------------------+ | All others - English -----------------------------------------------' | Language Configuration BIT 7-0 | 1 - German 5 - Italian -------------------------------------------+ | 2 - French 7 - Swiss French --------------------------------------+ | 4 - Spanish 8 - Swiss German --------------------------------------+ | All others - English -----------------------------------------------' -------+---------------------------------------------------------------------- _IDT | International Date/Time Format | Time Format BIT 12 | 0 - AM/PM, 1 - 24 hours --------------------------------------------+ | Date Format BIT 9 8 | 00 - MMDDYY ------------------------------------------------------+-+ | 01 - DDMMYY ------------------------------------------------------+-+ | 10 - YYMMDD ------------------------------------------------------+-+ | 11 - YYDDMM ------------------------------------------------------+-' | Separator for date BIT 7-0 | ASCII Value (i.e. "." or "/") --------------------------------------' -------+---------------------------------------------------------------------- MiNT | MiNT | Present if MiNT/MultiTOS is active. Value represents the version | number of the MiNT kernel in hex (0x104 = 1.04) -------+----------------------------------------------------------------------